首页 > 系统问题

centos中lvs安装配置方法详解

番茄系统家园 · 2022-09-04 05:20:29

一、lvs-nat模式

网络配置：

复制代码代码如下:
lvs-server eth0 ：host-only adapter 192.168.56.101
lvs-server eth1 ：Internal 192.168.0.1
real-server-1 eth0：Internal 192.168.0.2
real-server-2 eth0：Internal 192.168.0.3

lvs-server：
1、安装ipvsadm软件

复制代码代码如下:
yum -y install ipvsadm*
echo 1/proc/sys/net/ipv4/ip_forward 路由器功能，ip转发
ipvsadm -C
ipvsadm -At 192.168.56.101:80 -s rr 轮叫模式
ipvsadm -at 192.168.56.101:80 -r 192.168.0.2 -m
ipvsadm -at 192.168.56.101:80 -r 192.168.0.3 -m
ipvsadm -L -n

2、real-server-1：

复制代码代码如下:
ifconfig eth0 192.168.0.2 netmask 255.255.255.0
route add default gw 192.168.0.1

3、real-server-2

复制代码代码如下:
ifconfig eth0 192.168.0.3 netmask 255.255.255.0
route add default gw 192.168.0.1
route -n 查看路由表

二、lvs-ipturn

网络配置：

复制代码代码如下:
lvs-server eth0：host-only adapter 192.168.56.101
real-server-1 eth0：host-only adapter 192.168.56.102
real-server-2 eth0：host-only adapter 192.168.56.103

lvs-server：
配置虚拟ip即vip

复制代码代码如下:
ifconfig tunl0 192.168.56.10 netmask 255.255.255.255 up
route add -host 192.168.56.10 dev tunl0/p

ivsadm -C
ipvsadm -At 192.168.56.10:80 -s rr
ipvsadm -at 192.168.56.10:80 -r 192.168.56.102 -i
ipvsadm -at 192.168.56.10:80 -r 192.168.56.103 -i
ipvsadm -L -n

real-server-1：

复制代码代码如下:
ifconfig tunl0 192.168.56.10 netmask 255.255.255.255 up
route add -host 192.168.56.10 dev tunl0
echo 1/proc/sys/net/ipv4/conf/tunl0/arp_ignore
echo 2/proc/sys/net/ipv4/conf/tunl0/arp_announce
echo 1/proc/sys/net/ipv4/conf/all/arp_ignore
echo 2/proc/sys/net/ipv4/conf/all/arp_announce

>>>>

real-server-2：

>>>>

网络配置：

复制代码代码如下:
lvs-server eth0：host-only adapter 192.168.56.101/p

real-server-1 eth0：host-only adapter 192.168.56.102

real-server-2 eth0：host-only adapter 192.168.56.103

lvs-server：

ifconfig eth0:0 192.168.56.10 netmask 255.255.255.255

route add -host 192.168.56.10 dev eth0:0

ipvs:

复制代码代码如下:
ipvsadm -C ipvsadm -At 192.168.56.10:80 -s rr ipvsadm -at 192.168.56.10:80 -r 192.168.56.102 -g ipvsadm -at 192.168.56.10:80 -r 192.168.56.103 -g ipvsadm -L -n/p

real-server-1： ifconfig lo:0 192.168.56.10 netmask 255.255.255.255 route add -host 192.168.56.10 dev lo:0 echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce

real-server-2： ifconfig lo:0 192.168.56.10 netmask 255.255.255.255 route add -host 192.168.56.10 dev lo:0 echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce

免责声明：凡标注转载/编译字样内容并非本站原创，转载目的在于传递更多信息，并不代表本网赞同其观点和对其真实性负责。如果你觉得本文好，欢迎推荐给朋友阅读；本文链接： https://m.nndssk.com/xtwt/197619etngPx.html。